CH

 
您现在的位置: 首页 > Product > 10/100/1000…

10/100/1000M single mode single fiber 1 optical port+8*10/100M RJ45 ports fiber switch

The TCE-MD2718GES20AB Series 1*10/100/1000M fiber port & 8*10/100/1000M RJ45 ports Switch converts eight independent 10/100/1000Base-TX twisted pair electrical signals and one single 1000Base-FX optical signal to each other. It extends the network's reach from the 100M limit of copper to 120KM. By using switching and store-and-forward technology to enable data before the two network connections to the media, it greatly increases the fabric flexibility of Fiber Ethernet and Reduces the cost of the network set up to support dual-fiber multi-mode, dual-fiber single-mode, single-mode single-mode fiber and other optical transmission.


  • 产品特点
  • 技术参数
  • 产品尺寸
  • 订购信息
  • 典型应用
  • 资料下载
  • lStorage and forwarding capabilities to support rate adaptation and protocol translation;

    lAdaptive connection 10M100M and 1000M network and the network port supports full-duplex/ half-duplex adaptation and traffic control;

    lAutomatic detection and correction of incorrect poles on each port of a twisted pair;

    lData transfer rate (line speed) is 14,880 frames per second (10M);

    lData transfer rate (line speed) is 14,8800 frames per second (100M);

    lData transfer rate (line speed) is 14,88000 frames per second (1000M);

    lThe amount of power 5W;

    lSupport 12K effective MAC address table; Supports MAC address learning and aging automatically;

    l8 MB packet buffer;

    lWith broadcast storm protection;

    lSupport physical isolation and logical isolation. Through a key to achieve switching function and physical isolation function selection, on-site debugging convenient, stable and reliable (see product reference diagram red button)


  • Standard Protocol

    IEEE 802.3, IEEE 802.3u, IEEE 802.3d, IEEE 802.3Q

    Band Width

    RJ 45 Port : 8*10/100/1000M

    Optical Port: 1.25G

    Operation Mode

    Full /Half duplex mode

    Connectors

    UTP: RJ-45

    Fiber connector : SC/FC/ST

    LED Indicators

    PWR,LINK,1000M,L/A

    UTP Cable

    Cat5 UTP (within 100m

    Fiber Cable

    9/125μm,(the max distance up to 20 -120km)

    50/125, 62. 5/125μm(the max distance up to 2km)

    Power Supply

    External Power supply

    5V, 2A

    Power Consumption

    ≤5W

    Environmental Parameters

    Work Temperature

    0~50 

    Storage Temperature

    -40~70 

    Humidity

    5%~90% non-condensing

    MTBF (Hours)

    >30000

    Size and Weight

    structure

    Size

    Gross Weight

    External

    199*88*25mm  

    0.8 kg

    Certification

    FCC Part 15 , Class A, RoHS and CE Mark


  • size:199*88*25mm